Abstract
SiC devices in a SiC power adapter switch fast, and loop inductance excites ringing at commutation. Voltage spikes and EMI of the SiC power adapter increase, so layout and snubbers must suppress ringing together in the SiC power adapter.

1. Ringing Cause and Key Parameters
Ringing in the SiC power adapter comes from LC resonance between loop inductance and device output capacitance, and higher current slew excites larger spikes. Ringing frequency of the SiC power adapter relates to inductance and capacitance, usually in the tens of megahertz, right in the radiated emission band. Amplitude depends on damping, and lower loop resistance means slower decay in the SiC power adapter.
2. Snubber Types and Trade-offs
RC snubbers absorb node energy in the SiC power adapter, with resistance and capacitance matched to ringing frequency. RCD clamps in the SiC power adapter transfer spike energy to a capacitor before release, costing less efficiency than pure RC. Active clamps recover energy through an auxiliary switch in the SiC power adapter, giving the best suppression at higher complexity for high power.

3. Package and Layout Parasitics
Internal package inductance and lead length of the SiC power adapter form part of the loop, so package parasitics matter in selection. Power loops of the SiC power adapter should be compact rings with short high di/dt paths and small loop area. Thermal pads and ground planes must balance heat and parasitics, since oversized pads add capacitive coupling in the SiC power adapter.
4. Stress and EMI Effects of Ringing
Ringing spikes ride on drain-source voltage of the SiC power adapter and may exceed rating margin, aging devices over time. Ringing also couples through parasitics to input and output cables, raising conducted and radiated emission of the SiC power adapter. Debug should watch both waveform and spectrum, since clipping the peak may merely move energy to another band.

5. Waveform Validation and Corrective Order
Validation of the SiC power adapter measures drain-source waveforms at maximum input, full load and the worst switching phase, recording spike amplitude and frequency. Corrective order improves layout and package first, then gate resistance, and adds snubbers last in the SiC power adapter. Snubbers add loss, so they are weighed against efficiency targets rather than trading efficiency for a clean waveform.
Conclusion
Ringing suppression in a SiC power adapter combines layout, package and snubber; oversized snubbers sacrifice efficiency. Simsukian provides waveform testing and snubber optimisation. Overseas buyers are welcome to contact Simsukian to confirm switching schemes for the SiC power adapter.
FAQ
Q1: Does Simsukian support OEM and ODM orders?
A1: Yes, Simsukian supports OEM & ODM customization, including logo, casing, parameter and packaging adjustment.
Q2: What certifications can Simsukian provide?
A2: Simsukian can provide CE, RCM, FCC, UL, CCC, KC/KCC, PSE, SAA certification certificates. The company holds ISO9001 and ISO14001 system certifications.
Q3: What is the sample lead time?
A3: Sample preparation takes 5 working days.
Q4: What trade terms can be accepted for cooperation?
A4: Simsukian supports FOB, and EXW can be discussed upon customer request.
Q5: What is the warranty period for the products?
A5: The product warranty period is 1 year.
References
1. Simsukian Official Website
2. EN 55032 Electromagnetic compatibility of multimedia equipment – Emission requirements
3. IEC 62368-1 Audio/video, information and communication technology equipment – Safety requirements
Power adapter
Power adapter
Related Articles More>>
- Co-design of Main and Auxiliary Standby Outputs in Desktop Power Adapter
- Insulation and Thermal Correction for Power Adapter at High Altitude
- Tensile and Mechanical Strength Test Analysis of Conversion Pin Adapter
- Long-term Reliability Validation for USB Charger: Ageing Test and Component Derating Design